Enable Outside Access to Internal Devices

 

Let’s say you have a DVR that has a static IP of 192.168.1.200 and you need to forward port 7000 so that you can connect to it remotely. This article will give you step by step instructions to set up the port forwarding.
How to port forward?
1. Once logged in, go to IP > Firewall
2. Select section on NAT

 Windows Server  of Active Directory Installing  step by step.............

আজকের বিষয় Windows server 2008 এর Active Directory On Windows Server 2008 installing


যখন Administrator কে অনেক গুলো কম্পিউটার একসাথে নিয়ন্ত্রন করা অসম্ভব হয়ে পরে, তখন একটি Windows Server ইন্সটল করে Domain এর Database, Network নিয়ত্রন করার জন্য Active Directory on the Windows server ইন্সটল করতে হয়।
উইন্ডোজ সার্ভার এর Active Directory ইন্সটল করার জন্য নিচের ধাপগুল অনুসরণ করতে হবে। চলুন দেখি টেকটিউন্সে আমার টিউনের সাথে। কিভাবে Active Directory ইন্সটল করতে হয়। Active Directory ইন্সটল করার জন্য নিচের ধাপগুল অনুসরণ করুন ।
১। Active Directory সাফল্যের সাথে install করার জন্য নিচের ৪ টি ধাপ ইন্সটল থাকতে হবে। Have windows server 2008 already installed
(ক) উইন্ডোজ সার্ভার ২০০৮ install থাকতে হবে।
Have administrator privilege on the system
(খ) System পরিচালনা করার জন্য Administrator এর বিশেষ অধিকার থাকতে হবে।
Be able to reboot the system any time
(গ) যে কোন সময় System Reboot করতে সক্ষম হতে হবে।
Have an NTFS partition with enough free space
(ঘ) NTFS ফর্মেটে যথেষ্ট |Free Space থাকতে হবে।
২। ইন্সটল করার পূর্বে নিচের বিষয়গুলো মনে রাখতে হবে।</strong>(A)
If you are installing active directory on windows server 2008 for the 1st time, so it should be a global catalog server , it can’t be RODC (Read only domain control).
(B) NT 4.O Domain controllers are not supported on windows server 2008 anymore.
(C) If you still have NT Domain controllers on your network, you need to have 2000/2003 DCs to support them.
(D) If you are making windows server 2008 a Domain controller on windows Server 2003 forest, you must prepare the forest for Windows server 2008 by running APREP (AMRAAM Producibility Enhancement Program .
(ক) প্রথমে আপনার কম্পিউটার এর Name পরিবর্তন করে নেন My Computer>Right Baton>Properties> Computer Name থেকে আপনার মনের মত করে। তারপর Ok করে বের হয়ে আসুন। নিচের চিত্রের মতঃ-

(খ) installing Active Directory Domain Services এর কাজ শুরু হয়ে গেলঃ-
1. প্রথমে আপনার Windows server 2008 এর Active Directory install আছে কিনা তা chack করার জন্য প্রথমে Start> Administrative Tools> Active Directory Users and computer এ ক্লিক।

2. তারপর active directory domain services নামে একটি window আসবে ok করুন।

3. এ চিত্র দেখুন এখানে কোন Domain ইন্সটল হয়নি।

4. এখান চলুন Filnally কিভাবে Active Directory Domain Servecs বা Doamin Name ইন্সটল করতে হয়।
5. Start>Run এ click করে dcpromo লিখে Enter করুন। আর ScreenShout গুলো Flow করুন।
6. Welcome to the Active Directory Domain Services installations Wizard আসবে। এখানে User advanced mode installation এ ক্লিক করে Next এ ক্লিক।

7. আবারে Next এ ক্লিক।

8. এখানে Create a new domain in a new forest এ সিলেক্ট। যেহেতু আমার নতুন Domain ইন্সটল করব। তারপর Next.

9. এখানে আপনার Domain টি কি নামের হবে তা Type করুন। ( http://www.techtunes.com.bd একটি Domain name। তাই FQDN of the froest root domain হবে, techtunes.com.bd) আমি এখানে Domain.com দিয়েছি বুঝানোর জন্য। আপনি আপনার Domian টি কি হবে তা দিতে পারবেন। তবে খেয়ার রাখবেন আপনার Domain টি যেন অনন্য কোন Domain Name এর সাথে না মিলে। যেমন (www.techtunes.com.bd). globle world একই domain supportable হয় না। এ সম্পর্কে লিখতে অনেক সময় লাগবে।

10. নিচের চিত্রের মত এখানে Domain NetBIOS Name এ Domain চলে আসবে। কোন কিছু পরিবর্তন না করে Next করুন।

11. এ Window থেকে Forest functional level থেকে Windows server 2008 সিলেক্ট করে Next. ( আমি এ টিউনের শিরনামে বলেছি এ টিউনটির Acitve Directory domain services 2008 বা Domain Name কিভাবে install করতে হয়।

12. Additional Domain Controllation নামে একটি Window আসবে। Next করুন।

13. নিচের চিত্রের মত একটি Window আসবে। Do you want to continue. এখানে Yes করুন।

14. আবার Next করুন।

15. আপনার Adminstrator Password দিয়ে Next করুন।

16. এখানে Summary তে দেখুন Forst functional lavel: windows server 2008 এবং Domain Functional lavel: 2008 আছে। Next এ ক্লিক করুন।

17. এখন আপনার server টি Active directory Domain Services বা Domain Name ইন্সটল হতে থাকবে। Install শেষে Computer Restart চাইবে, আপনি ইচ্ছে করলে Domain ইন্সটল হওয়ার শেষে Automatic ভাবে Restart করাতে। এ জন্য আপনাকে এই Wondow এর মধ্যে Reboot on Completion কে Select করে দিতে হবে।

( Active directory domain Services ইন্সটল হতে অনেক সময় নিবে, সেই পর্যন্ত আপনাকে অপেক্ষা করতে হবে।)
কম্পিউটার Restart হওয়ার পর আপনার Computer টা Logon করুন।
18. এখন Start>Administrative Tools>Active directory Users and Computers এ ক্লিক।
19. এ Wizard এ দেখুন আপনার computer টা Domain.com নামে Active directory domain Services ইন্সটল হয়েছে।

Block an IP or IP Range Using Windows IP Security Policy

If you need to block an IP, or range of IP addresses on your Windows Server 2008 or 2012 Server for security reasons you may do so by following the instructions below.  If there is an IP range of a specific country you need to block and are unsure of the IP addresses allocated to the country please visit blockacountry.com to locate it's allocated IP address.

Note:  Due to restrictions in our Domain Policy if you need to restrict RDP access to your server to only selected IP addresses you will need to use the instructions in our Restrict RDP Access by IP Address article.

Please take caution when blocking a large range of IP addresses as this will stop anyone in that range from accessing any sites on your server.  If a restore of your server is required to regain access an additional charge may apply.

Setting up the IP Policy
1.    Log into your dedicated server using Remote Desktop.
2.    Click Start > Run >type MMC press OK.
3.    In the console click File > Add/Remove Snap in.
4.    Select the IP Security Policy Managment item in the Available snap-ins list click the Add button.
5.    Leave Local Computer checked and click Finish and then OK. You should now be back to the console.
6.    If no Security Policy exists yet, in the Left frame right click IP Security Policies on Local Computer and then click Create IP Security Policy then continue to next step.  If a Security Policy does exist, right click on it in the Right pane and click Properties then continue to next section (Setting up the IP Filters)
7.    Click Next on the first page of the Wizard
8.    Name your IP Security Policy and provide a description if desired, then click Next.
9.    Check the box for the Activate the default response rule option then click Next.
10.    Leave the Active Directory default option on the Default Response Rule Authentication Methodpage selected and click Next.
11.    On the final page of the Wizard leave the Edit properties option checked and click Finish. You should now have the properties window open.
Setting up the IP Filters to ALLOW access

These steps must be completed to allow access to your server from the Managed.com subnets to allow administration of the server by Managed.com Support technicians and our access by our optimization tools.  You will also need to allow any IP addresses you want to use to access your server.

Managed.com Subnets:

US: 208.88.72.0/21 and 70.34.32.0/20
UK: 212.84.80.0/22
EU 1:70.34.40.0/21
AU: 199.241.152.0/21
1.    Click Add then click Next to continue.
2.    Leave This rule does not specify a tunnel selected and click Next.
3.    Leave all network connections selected and click Next.
4.    You should now be on the IP filter list. You need to create a new filter, so don't select any of the default ones. Click Add.
5.    Type a Name for your list, and a Description if desired.
6.    Leave Mirrored. Match packets with the exact opposite source and destination addresses checked. Click Next.
7.    Select A specific IP Address of Subnet as the Source address, enter the IP of Subnet you want to allow (see note above for Managed.com subnets) then click Next.
8.    You can now select A Specific IP Address or Any IP Address for the Destination address.
9.    Select the Protocol Type you wish to allow access to. Click Next and then Finish.
10.    Complete the steps above for each additional IP address you want to add to the Filter.
11.    Once you have added all the required IP Addresses to the list click OK.
12.    Select the list you have just created from the IP Filter List and click Next.
13.    In the Filter Action box click Add to create a new Action for the List you've selected.
14.    Click Next on the first page of the Filter Action Wizard
15.    Give your action a name such as AllowConnection and click Next.
16.    Select the Permit radio button and click Next.
17.    Click Finish.
18.    Select the Filter Action you've just created and click Next then Finish.
19.    Click OK to close the RDP Policy Properties box.
Once you have added the filter to ALLOW access, follow the steps block unwanted access to the server or particular protocols.

Setting up the IP Filters to BLOCK access

Using Any IP Address as the IP Traffic Source will block access from all sources and is not recommended unless blocking access to a single protocol such as RDP, you will first need to complete the steps above to allow access to the Managed.com subnet, and any other IP addresses you wish to allow access to your server.
1.    Click Add then click Next to continue.
2.    Leave This rule does not specify a tunnel selected and click Next.
3.    Leave all network connections selected and click Next.
4.    You should now be on the IP filter list. You need to create a new filter, so don't select any of the default ones. Click Add.
5.    Type a Name for your list, and a Description if desired.
6.    Click Add... then click Next to continue.
7.    In the description box type a description.
8.    Leave Mirrored. Match packets with the exact opposite source and destination addresseschecked. Click Next.
9.    Select the Source of the traffic you with to block then click Next.
10.    You can now select A Specific IP Address or Any IP Address for the Destination address.
11.    If you have selected A specific IP Address, type in the IP Address you want to block. Click Next.
12.    Select the Protocol Type you wish to block, or select Any if you want to block access to all protocols. Next and then Finish.
13.    Complete the steps above for each additional IP address you want to add to the Filter list, or if you have blocked all IP addresses continue to the next step.
14.    Once you have added all the required IP Addresses to the list click OK.
15.    Select the list you have just created from the IP Filter List and click Next.
16.    In the Filter Action box select the BlockConnection option and click Next.
17.    Click Finish.
18.    Click OK to close the RDP Policy Properties box.
19.    Once you're back in the Console/IP Security Policies screen, right click on the Policy you have just created and select Assign. This step will not be necessary if you are using an existing Policy.

Two-step verification on Windows and Mac

Add caption

Enhanced login protection doesn't require an iPhone or Android phone.

by M Sakhawat September 6, 2016, 10:55 PM

• Facebook
• Twitter
• Email
• Pinterest
• Google Plus

Two-step verification is a way to give your accounts more protection than just a password or PIN. If you use a verification app like Google Authenticator (iOS, Android), you log in to your account (email, bank, Amazon, and so on) with your username and password, and the app sends a temporary code to your phone that's the final key to get into your account. But if you want to generate verification codes on your desktop or laptop, you can.

Method 1: Chrome browser extensions

Using a Chrome extension is the most approachable method, because the extension will work on any device that runs the desktop version of the browser.
Authenticator for Chrome, for example, works in Linux, on Google's Chromebook laptops, as well as on Mac and Windows PCs. (Firefox doesn't currently have a comparable option, but the newly launched Open Two-Factor Authenticator may prove as popular, in time.) Authenticator doesn't have a catchy name, but it works pretty nicely.
There's also Authy for Chrome, but it hooks into the cloud and requires your phone number. If you're just doing app-based two-step verification, it's more secure to perform that function completely offline. But Authy is handy for codes generated via SMS messages that are ordinarily sent to your phone.

How to set up Authenticator for Chrome

Let's say you want to add Amazon two-step verification codes to Authenticator. After installing the browser extension, go to Amazon's website and log in. Go to Your Account, scroll down to Settings, click Login & Security Settings, and go to Advanced Security Settings. Click the Edit button, then Add New App in the Preferred Method section, click the link labeled Can't Scan the Barcode, and copy the bolded string of letters and numbers to your clipboard (Ctrl-C on your keyboard).

Add caption

Click the Authenticator icon in the upper-right corner of Chrome (it looks like a tiny QR code), then the pen icon at upper right. Click the + button and Manual Entry. Enter the email address associated with your Amazon account into the Account section. Paste that clipboard string into the Secret section, then click OK. Authenticator generates a new code every 30 seconds -- to copy it quickly, just click the code, and Authenticator will add it to your clipboard.
Authenticator may warn you that this string is not encrypted. If you decide to create a passphrase to encrypt the entries, be aware that you will lose access to this entry if the passphrase is lost. For your security, there is no password reset option.

Add caption

Method 2: Desktop client software

If you don't want to use Chrome, or if you prefer to keep your two-step verification code generation separate from your browser, you can install a standalone desktop app. However, you don't have as many options.
WinAuth is arguably the best for Windows users. It automatically supports a variety of services like Google, Microsoft, and Steam, and you can manually add secret strings for things like Amazon.
To do so, navigate to the folder where you downloaded WinAuth and double-click the app. This is not an installer file. Instead, the program is self-contained within this EXE file. Click the Add button, then Authenticator. Put something descriptive in the Name section, paste Amazon's secret string from your clipboard into the field below that, click Decode, then click Verify Authenticator. This will generate a test code. Go back to the Amazon account page where you copied the secret string, type this test code into the Enter Code section, and click the button labeled Verify Code and Continue.

Add caption

WinAuth will now give you the option to protect your codes with a password. It will also offer to use Windows' built-in encryption or a YubiKey. You can either create your password and click the OK button, or click the Cancel button to bypass these protection options. (If you change your mind later, you can access this menu by clicking the gear icon and selecting Change Protection.)
To generate a code, click the circular arrow button to the right of the account name. This code will be valid for 10 seconds. Right-click the entry to see a variety of options, like deleting it, renaming it, customizing its icon, and other functions.

What about two-factor authentication?

With two-factor authentication (2FA), factor one is the device you want to log in with, and factor two is the device you use to generate codes. So if you're generating codes on the same device you're logging in on, then you're technically not engaging in two-factor security. You're just using two-step verification.
Though two-step is not as secure as two-factor, it's still useful. For instance, if an unauthorized user breaks into a consumer database and gets your login info -- as with 68 million Dropbox accounts -- the intruder still won't be able to get into your account without the authentication code.
When hacks like that happen (and they happen more often than we'd like), it doesn't matter how good your password is, because the hackers will have it right in front of them if they can decrypt the database. But they won't have your verification code, since that's only generated on the device that you previously authorized to generate those codes.

Learn full versions of 64 short words

১। Wi-Fi র পূর্ণরূপ — Wireless Fidelity.
২। HTTP এর পূর্ণরূপ — Hyper Text Transfer Protocol.
৩। HTTPS এর পূর্ণরূপ — Hyper Text Transfer Protocol Secure.
৪। URL এর পূর্ণরূপ — Uniform Resource Locator.
৫। IP এর পূর্ণরূপ— Internet Protocol
৬। VIRUS এর পূর্ণরূপ — Vital Information Resource Under Seized.
৭। SIM এর পূর্ণরূপ — Subscriber Identity Module.
৮। 3G এর পূর্ণরূপ — 3rd Generation.
৯। GSM এর পূর্ণরূপ — Global System for Mobile Communication.
১০। CDMA এর পূর্ণরূপ — Code Divison Multiple Access.
১১। UMTS এর পূর্ণরূপ — Universal Mobile Telecommunication System.
১২। RTS এর পূর্ণরূপ — Real Time Streaming
১৩। AVI এর পূর্ণরূপ — Audio Video Interleave
১৪। SIS এর পূর্ণরূপ — Symbian OS Installer File
১৫। AMR এর পূর্ণরূপ — Adaptive Multi-Rate Codec
১৬। JAD এর পূর্ণরূপ — Java Application Descriptor
১৭। JAR এর পূর্ণরূপ — Java Archive
১৮। MP3 এর পূর্ণরূপ — MPEG player lll
১৯। 3GPP এর পূর্ণরূপ — 3rd Generation Partnership Project
২০। 3GP এর পূর্ণরূপ — 3rd Generation Project
২১। MP4 এর পূর্ণরূপ — MPEG-4 video file
২২। AAC এর পূর্ণরূপ — Advanced Audio Coding
২৩। GIF এর পূর্ণরূপ — Graphic Interchangeable Format
২৪। BMP এর পূর্ণরূপ — Bitmap
২৫। JPEG এর পূর্ণরূপ — Joint Photographic Expert Group
২৬। SWF এর পূর্ণরূপ — Shock Wave Flash
২৭। WMV এর পূর্ণরূপ — Windows Media Video
২৮। WMA এর পূর্ণরূপ — Windows Media Audio
২৯। WAV এর পূর্ণরূপ — Waveform Audio
৩০। PNG এর পূর্ণরূপ — Portable Network Graphics
৩১। DOC এর পূর্ণরূপ — Doc**ent (Microsoft Corporation)
৩২। PDF এর পূর্ণরূপ — Portable Doc**ent Format
৩৩। M3G এর পূর্ণরূপ — Mobile 3D Graphics
৩৪। M4A এর পূর্ণরূপ — MPEG-4 Audio File
৩৫। NTH এর পূর্ণরূপ — Nokia Theme(series 40)
৩৬। THM এর পূর্ণরূপ — Themes (Sony Ericsson)
৩৭। MMF এর পূর্ণরূপ — Synthetic Music Mobile  Application File
৩৮। NRT এর পূর্ণরূপ — Nokia Ringtone
৩৯। XMF এর পূর্ণরূপ — Extensible Music File
৪০। WBMP এর পূর্ণরূপ — Wireless Bitmap Image
৪১। DVX এর পূর্ণরূপ — DivX Video
৪২। HTML এর পূর্ণরূপ — Hyper Text Markup  Language
৪৩। WML এর পূর্ণরূপ — Wireless Markup Language
৪৪। CD এর পূর্ণরূপ — Compact Disk.
৪৫। DVD এর পূর্ণরূপ — Digital Versatile Disk.
৪৬। CRT — Cathode Ray Tube.
৪৭। DAT এর পূর্ণরূপ — Digital Audio Tape.
৪৮। DOS এর পূর্ণরূপ — Disk Operating System.
৪৯। GUI এর পূর্ণরূপ — Graphical User Interface.
৫০। ISP এর পূর্ণরূপ — Internet Service Provider.
৫১। TCP এর পূর্ণরূপ — Transmission Control Protocol.
৫২। UPS এর পূর্ণরূপ — Uninterruptible Power Supply.
৫৩। HSDPA এর পূর্ণরূপ — High Speed Downlink Packet Access.
৫৪। EDGE এর পূর্ণরূপ — Enhanced Data Rate for
GSM [Global System for Mobile Communication]
৫৫। VHF এর পূর্ণরূপ — Very High Frequency.
৫৬। UHF এর পূর্ণরূপ — Ultra High Frequency.
৫৭। GPRS এর পূর্ণরূপ — General Packet Radio Service.
৫৮। WAP এর পূর্ণরূপ — Wireless Application Protocol.
৫৯। ARPANET এর পূর্ণরূপ — Advanced Research  Project Agency Network.
৬০। IBM এর পূর্ণরূপ — International Business Machines.
৬১। HP এর পূর্ণরূপ — Hewlett Packard.
৬২। AM/FM এর পূর্ণরূপ — Amplitude/ Frequency  Modulation.
৬৩। WLAN এর পূর্ণরূপ — Wireless Local Area Network
৬৪। USB এর পূর্ণরূপ — Universal Serial Bus.

Create Windows 98/ME/NT/2K/XP/2003 all in one installation DVD

You are here: Tutorials > Create Windows 98/ME/NT/2K/XP/2003 all in one installation DVD + + + same as........ Next Wimdows ISO Fill....

---

1. Prepare Windows installation CD

• Windows 98 installation CD.
• Windows ME installation CD.
• Windows NT 4.0 Server installation CD.
• Windows 2000 professional installation CD.
• Windows XP installation CD.
• Windows 2003 installation CD. 

2. Collection of the bootable image file from Windows installation CD 

• Make "boot_os" folder on C: (you may  change to other driver)
• Insert Windows 98 installation CD into CD/DVD-ROM
• Export bootable information from Window 98 installation CD to c:\boot_os\boot98.bif
  
  1. Click "Make CD/DVD image file from CD/DVD-ROM " button to open "make iso from cd-rom" dialog
  
  
  
  2. Choose CD-ROM, Input the output file name and choose "export boot image" option.
  
  
  
  3. Click OK.
• Insert Windows ME installation CD into CD/DVD-ROM
• Export bootable information from Window ME installation CD to c:\boot_os\bootme.bif
• Insert Windows NT 4.0 installation CD into CD/DVD-ROM
• Export bootable information from Window NT4.0  installation CD to c:\boot_os\bootnt.bif
• Insert Windows 2000 professional installation CD into CD/DVD-ROM
• Export bootable information from 2000 professional installation CD to c:\boot_os\boot2k.bif
• Insert Windows XP installation CD into CD/DVD-ROM
• Export bootable information from Window XP installation CD to c:\boot_os\bootxp.bif
• Insert Windows 2003 installation CD into CD/DVD-ROM
• Export bootable information from Window 2003 installation CD to c:\boot_os\boot2k3.bif
  
  
  3. Making of multiple OS installation DVD image file
• Click "Create new image file" button on toolbar.
  
  
• Click  button to create "Win98" folder into root directory.
• Insert Windows 98 installation CD to CD-ROM.
• Add all files and folders from Windows 98 installation CD to "Win98" folder.
• Click button to save Windows 98 installation into c:\multi_os.iso ( you may choose other iso image file name)
  
  
• Take out Windows 98 installation CD, and insert Windows ME installation CD to CD/DVD-ROM
• Click button to create "WinME" folder into root directory.
• Add all files and folders from Windows ME installation CD to "WinME" folder.
• Click button to save Windows ME installation into multi_os.iso
  
  
• Take out Windows ME installation CD, and insert Windows NT 4.0 installation CD to CD/DVD-ROM
• Click button to create "WinNT" folder into root directory.
• Add all files and folders from Windows NT 4.0 installation CD to "WinNT" folder.
• Click button to save Windows NT 4.0 installation into multi_os.iso
  
  
• Take out Windows NT 4.0 installation CD, and insert Windows 2000 Professional installation CD to CD/DVD-ROM
• Click button to create "Win2K" folder into root directory.
• Add all files and folders from Windows 2000 Professional installation CD to "Win2K" folder.
• Click button to save Windows 2000 Professional installation into multi_os.iso
  
  
• Take out Windows 2000 Professional installation CD, and insert Windows XP installation CD to CD/DVD-ROM
• Click button to create "WinXP" folder into root directory.
• Add all files and folders from Windows XP installation CD to "WinXP" folder.
• Click button to save Windows XP installation into multi_os.iso
  
  
• Take out Windows XP installation CD, and insert Windows 2003 installation CD to CD/DVD-ROM
• Click button to create "Win2K3" folder into root directory.
• Add all files and folders from Windows 2003 installation CD to "WinXP" folder.
• Click button to save Windows 2003 installation into multi_os.iso
  

4. Do some change of multiple OS installation DVD image file for creating multiple bootable DVD

• Open c:\multi_os.iso with MagicISO.
• Copy the folder "\Win2K\i386" to "\iW2K".
  
  1. Hold the CTRL key down, and use mouse to drag folder "\Win2K\i386" to root.
  
  
  
  
  2. Click  button to rename i386 to iW2K.
  
  
• Copy the folder "\WinXP\i386" to "\iWXP".
  
  1. Hold the CTRL key down, and use mouse to drag folder "\WinXP\i386" to root.
  
  
  
  
  2. Click  button to rename i386 to iWXP.
  
  
• Copy the folder "\Win2K3\i386" to "\i2K3".
  
  1. Hold the CTRL key down, and use mouse to drag folder "\Win2K3\i386" to root.
  
  
  
  
  2. Click  button to rename i386 to i2K3.
  
  
• Copy the file "\Win2K\CDROM_IP.5" and "\Win2K\CDROM_NT.5" to root directory.
  Hold the CTRL key down, and use mouse to drag the files "\Win2K\CDROM_IP.5" and "\Win2K\CDROM_NT.5" to root.
  
  
• Copy the file "\WinXP\WIN51" and "\WinXP\WIN51IP" to root directory.
  Hold the CTRL key down, and use mouse to drag the files "\WinXP\WIN51" and "\WinXP\WIN51IP" to root.
  
  
• Copy the file "\Win2K3\WIN51IA" to root directory.
  Hold the CTRL key down, and use mouse to drag the files "\Win2K3\WIN51IA" to root.
  
  
• Create "iW2K" folder into "c:\boot_os"
• Extract "\iW2K\SETUPLDR.BIN" file to "c:\boot_os\iW2K".
  
  1. Select "\iW2K\SETUPLDR.BIN" file.
  2. Click  button to extract the file to "c:\boot_os\iW2K".
• Open "c:\boot_os\iW2K\SETUPLDR.BIN" with UltraEdit or WinHex.
• Replace all words "I386" with "IW2K"(Must be capitalization).
  
  1.Click  "seach"->"Replace" menu item. Or Press "CTRL+R"
  
  
  
  2. Input "I386" into "Find What". Input "IW2K"(Must be capitalization) into "Replace With"
  
  
  
  3. Click "Replace All" button.
  
  4. Press CTRL+S to save the modified file.
• Copy c:\boot_os\iW2K\SETUPLDR.BIN back to "\iW2K\SETUPLDR.BIN" within c:\multi_os.iso.
• Extract "\iW2K\TXTSETUP.SIF" file to "c:\boot_os\iW2K".
  
  1. Select "\iW2K\TXTSETUP.SIF" file.
  2. Click  button to extract the file to "c:\boot_os\iW2K".
• Open "c:\boot_os\iW2K\TXTSETUP.SIF" with UltraEdit or NotePad
• Replace all words "\i386" within the section "[SourceDisksNames.x86]" with "\IW2K"
  
  
• Copy "c:\boot_os\iW2K\TXTSETUP.SIF" back to "\iW2K\TXTSETUP.SIF" within c:\multi_os.iso.
• Create "iWXP" folder into "c:\boot_os"
• Extract "\iWXP\SETUPLDR.BIN" file to "c:\boot_os\iWXP".
  
  1. Select \iWXP\SETUPLDR.BIN file.
  2. Click  button to extract the file to "c:\boot_os\iWXP".
• Open "c:\boot_os\iWXP\SETUPLDR.BIN" with UltraEdit or WinHex
• Replace all words "I386" with "IWXP"(Must be capitalization).
• Copy c:\boot_os\iWXP\SETUPLDR.BIN back to "\iWXP\SETUPLDR.BIN" within c:\multi_os.iso
• Extract "\iWXP\TXTSETUP.SIF" file to "c:\boot_os\iWXP".
  
  1. Select "\iWXP\TXTSETUP.SIF" file.
  2. Click  button to extract the file to "c:\boot_os\iWXP".
• Open "c:\boot_os\iWXP\TXTSETUP.SIF" with UltraEdit or NotePad
• Replace all words "\i386" within the section "[SourceDisksNames.x86]" with "\IWXP"
• Copy "c:\boot_os\iWXP\TXTSETUP.SIF" back to "\iWXP\TXTSETUP.SIF" within c:\multi_os.iso.
• Create "i2K3" folder into "c:\boot_os"
• Extract "\i2K3\SETUPLDR.BIN" file to "c:\boot_os\i2K3".
  
  1. Select \i2K3\SETUPLDR.BIN file.
  2. Click  button to extract the file to "c:\boot_os\i2K3".
• Open "c:\boot_os\i2K3\SETUPLDR.BIN" with UltraEdit or WinHex
• Replace all words "I386" with "I2K3"(Must be capitalization).
• Copy c:\boot_os\W2K3\SETUPLDR.BIN back to "\i2K3\SETUPLDR.BIN" within c:\multi_os.iso.
• Extract "\i2K3\TXTSETUP.SIF" file to "c:\boot_os\i2K3".
  
  1. Select "\i2K3\TXTSETUP.SIF" file.
  2. Click  button to extract the file to "c:\boot_os\i2K3".
• Open "c:\boot_os\i2K3\TXTSETUP.SIF" with UltraEdit or NotePad
• Replace all words "\i386" within the section "[SourceDisksNames.x86]" with "\I2K3"
• Copy "c:\boot_os\i2K3\TXTSETUP.SIF" back to "\iWXP\TXTSETUP.SIF" within c:\multi_os.iso.
• Click button to save c:\multi_os.iso.
• Open "c:\boot_os\boot2k.bif" with UltraEdit or WinHex.
• Replace all words "I386" with "IW2K"(Must be capitalization).
• Open "c:\boot_os\bootxp.bif" with UltraEdit or WinHex.
• Replace all words "I386" with "IWXP"(Must be capitalization).
• Open "c:\boot_os\boot2k3.bif" with UltraEdit or WinHex.
• Replace all words "I386" with "I2K3"(Must be capitalization). 
  
  
  
  
  5. Making of multi-boot image file
• Click "Make multi-boot CD/DVD image file" button to open "Multi-Boot Image Editor"
  
  
• Click "Add ..." button to add one boot item into multi-boot image file.
  
     
• Choose "Boot from bootable image file" option. and click "Next" button to next step.
  
  
• Choose "From Local Computer" option, and input "c:\boot_os\boot98.bif", and click "Next" button to next step.
  
  
• Input description of Window 98 boot image, and set "Hot Key" to "1"
  
  
• Click "Finish" to complete Windows 98 bootable item.
  
  
• Add Windows ME bootable item in the same way as creating Windows 98 bootable item. 

  From Local Computer:	c:\boot_os\bootme.bif
  Description:	2. Install Window ME
  Hok Key:	2

• Add Windows NT 4.0 bootable item in the same way as creating Windows 98 bootable item. 

  From Local Computer:	c:\boot_os\bootnt.bif
  Description:	3. Install Window NT 4.0
  Hok Key:	3

• Add Windows 2000 professional bootable item in the same way as creating Windows 98 bootable item. 

  From Local Computer:	c:\boot_os\boot2k.bif
  Description:	4. Install Window 2000 Professional
  Hok Key:	4

• Add Windows XP bootable item in the same way as creating Windows 98 bootable item. 

  From Local Computer:	c:\boot_os\bootxp.bif
  Description:	5. Install Window XP
  Hok Key:	5

• Add Windows 2003 bootable item in the same way as creating Windows 98 bootable item. 

  From Local Computer:	c:\boot_os\boot2k3.bif
  Description:	6. Install Window 2003
  Hok Key:	6

• Add first assistant bootable item for booting from hard disk.
  
  
• Choose booting from first hard disk
  
  
• Input "7. Boot from hard disk" into description of bootable item, and set "Hot Key" to "7", and click "finish" button
  
  
• Add second assistant bootable item for booting from floppy driver.
  
  
• Input "8. Boot from floppy driver" into description of bootable item, and set "Hot Key" to "8", and click "finish" button
  
  
• Add third assistant bootable item for reboot
  
  
• Input "9. Reboot" into description of bootable item, and set "Hot Key" to "9", and click "finish" button
  
  
• Set "boot from hard disk" as default bootable item. (you may choose other bootable item)
  
  
• Click "Save" button to save multi-boot image file to c:\boot_os\multi_os_boot.mbi
• Click "Close" to complete making of multi-boot image file. 
  
  
  
  
  6. Apply multi-boot image file into DVD image file
• Open c:\multi_os.iso with MagicISO.
• Click "Load boot image ..." button to open "bootable option" dialog.
  
  
• Choose "From multi-bootable image file" option, and input "c:\boot_os\multi_os_boot.mbi"
  
  
• Click "OK' to apply.
• Click button to save c:\multi_os.iso

7. Burn ISO to DVD

• Because multi_os.iso is larger than the capacity of CD. So we have to burn multi_os.iso onto DVD. Please place DVD-R, DVD-R/RW,  DVD+R or DVD+R/RW into your DVD recorder.
• Click  button to open "Burn CD!" Dialog
  
  
• Choose your DVD recorder, the CD/DVD image file, and other parameters.
  
  
• Click "Burn It" to start
• Finish